Tuesday, January 11, 2022

The ULU Knife

If the reader is not familiar with this odd looking kitchen tool, there is quite a bit of interesting facts and features associated with it that even after almost 3000 years of history it is still pretty much like the museum stone artifacts when it was first used by the ancestors of indigenous people in Alaska and the northern territories of Canada. Artifacts  made from shards of slate or thin stones have that almost quarter-moon shape cutting surface with handles made from various materials.  Later metal versions became less of a quarter moon to just about 1/8 slice of it.

"Museums exhibit Ulu knives found dating back to 2500 BC. These tools were also called an Uluaq, and were intended as a “woman’s knife”. Cutting the hard bone from meat and thick skins of animals, was significantly easier with these knives".

It is unique indeed.  The handle sits on top of the cutting blade and because of its shape it easily cuts with a rocking motion; also requiring less effort and will one-handedly cut since the intended meat or veggie to be cut is directly underneath it, partially held down. For example, a steak knife with one hand requires a fork on the other hand to hold down the meat during cutting. The Ulu as a single tool will filet, slice, dice, etc. effectively.

Also a unique feature is the hollowed out "crater" circular shape of the cutting board surface that is usually associated with it.  The "crater" keeps the cut pieces contained from spilling over the edge of the board.

 

As you can see from the following photos, all the cutting and slicing that went into preparing the fried rice recipe were done with the Ulu knife.





















It is obviously not for everyone but it could be if one prefers to use just one cutting tool in the kitchen that can do 80-90 per cent of the work. Only one tool to wash, right? But how did I come to possess an Ulu knife where it seems like I  obsessively have these many tools in our kitchen already?


"Obsessively" might be too harsh because, as in my woodworking hobby, I am very particular about using the exact "right tool" for the particular task.

Well, a few years ago we went on a cruise to Alaska. You know where this is going. Inevitably, the tour guide made sure of ushering us to places meant to bolster the local economy. Like many of the folks I was intrigued by the one little odd-looking tool touted by this one local shop as the knife of the indigenous Inuit. I oblige to purchase one - the budget version. But there was a reason for why this one. It is made from a saw blade - a woodworking tool, got it? (by cutting into shape several pieces from the long saw blade )


As in any cutting tool, the Ulu must be sharpened and honed well. My other "obsession" is sharpening.  And I have all the sharpening tools to prove it. 😊 I am willing to bet right now that I must have the sharpest knives in all of 47 homes in our subdivision. I am unanimous in that πŸ˜‹πŸ˜to quote Mrs. Slocum from the erstwhile British TV sitcom, "Are You Being Served". 

Would I recommend the Ulu knife?  Yes, to anyone who'd rather just have one tool to do much of the food preparation.  It will do 80-90 per cent of the task.  Check online because there are now a healthy dose of knife makers and sellers who have them, hand forged including ones with Damascus blades. However, please keep it sharp.  Otherwise, you will be disappointed.  A rod sharpener will do.  A diamond one is best.

Full disclosure on my part: Half of the sharpeners above I use primarily for my woodworking (chisels and hand plane irons, mostly).  Actually, I only recently "re-discovered" this Ulu knife in a cabinet where it sat for all that time after my fascination with it wore off years ago.  Well .. I saw it used on TV one day and ..

2 comments:

  1. I’m intrigued by your Ulu knife. If it’s handy for food preparation, Is would be good to own one.

    ReplyDelete
  2. That’s “it”, not “Is”. Sorry.

    ReplyDelete